TM RGX4400 - Advanced Configuration; Static Route

SYSTEM TECHNOLOGY
Doc. No.:
ST/WI/RG/RGX4400
Revision No: 1.0
- 47 -
Destination IP Address The destination IP address assigned to the traffic on which filtering is
applied.
Destination Prefix Length The length of the Destination IP address prefix.
Source Port Starting and ending source port numbers.
6.6 Advanced Configuration
6.6.1 Static route
Static routing is a form of routing entry which is configured by user or system administrator
manually. On the contrary, dynamic routing is produced by a dynamic routing protocol.
Enable
Enable or disable static routing on the connection.
Destination IP
The network IP address of the subnet. The destination IP
can be specified as the IP address of a subnet or a specific
host in the subnet. It can also be specified as all zeros to
indicate that this route entry should be used for all
destinations when no other route entry is matched (this