- 61 -
6.7.7 Time Zone
Simple Network Timing Protocol (SNTP) is a protocol which is used to synchronize the system
time to the public SNTP servers. The RG device supports SNTP client functionality in compliance
with IETF RFC2030. SNTP client runs in daemon mode. For configuring the system clock in the
RG device, SNTP client sends client requests to the configured SNTP server periodically.
Current Time The current time of the specified time zone. You can set the
current time by yourself or configured by SNTP.
Time Zone Select The time zone in which the RG device resides.
Enable SNTP client update Enable the SNTP client to update the system clock.
SNTP server The IP address or the host name of the SNTP server. You can
select from the list or set it manually.
6.7.8 TR-069
This page is to enable or disable TR069 Setting. TR069 is used to manage the RG device from the
remote internet side.
To Next Page
Loading...