- 49 -
System Description System description for the device.
System Contact Contact person and/or contact information for the device.
System Name An administratively assigned name for the device.
System Location The physical location of the device.
System Object ID Vendor object identifier. It’s the vendor’s authoritative
identification of the network management subsystem
Trap IP Address Destination IP address of the SNMP trap.
Community name (read-only) Name of the read-only community. This read-only
community allows read operation to all objects in the
MIB.
Community name (write-only) Name of the write-only community. This write-only
community allows write operation to the objects defines
as read-writable in the MIB.
6.6.3 Remote Access
Select a connection, select one or more services and configure the source IP Range of each
selected services. The protocol, destination port, and default mapping port are displayed
automatically.
To Next Page
Loading...