Finish Stainless steel
Dimensions 146 (w) x 113 (h) x 23.9 (d) mm (5.75" x 4.45" x 0.94")
Weight 170 g (0.37 lb)
Power Source Supplied from the VX-3000 system
Power Consumption 0.2 W
Speaker Line Input (CN1)
Screw connector, Applicable cable diameter: AWG 24 – AWG 19
Contact Output (CN2) Connected to the emergency contact input of VX-3004F/3008F/3016F
Connection cable: Twisted pair cable (shielded type is recommended)
Screw connector, Applicable cable diameter: AWG 24 – AWG 19
Speaker Line Max. load: 100 W
Note: applicable only for 100 V speaker line
Dimensions 70 (w) x 18 (h) x 45 (d) mm (2.76" x 0.71" x 1.77")
Weight 20 g (0.04 lb)
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
4 x 25 tapping screw (for direct wall mounting) ........................ 2
M4 x 20 machine screw (for mounting to the switch box) ........ 2
Note: The design and specifications are subject to change without notice for improvement.
Traceability Information for Europe
Manufacturer:
TOA Corporation
7-2-1, Minatojima-Nakamachi, Chuo-ku, Kobe, Hyogo,
Japan
Authorized representative:
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg,
Germany
URL: https://www.toa.jp/
202203
2.16. WB-RM500 Wall Mounting Bracket
2.17. VM-300SV End Of Line Unit
To Previous Page
Loading...
