Document Ref 909342-001 Rev 11 Page 5-7
Quantium 410 Installation Manual Installation
5.4.3 LEAK PLATE SEALING
To fulfill to ECN13617-1, it is required to apply sealant between leak-plate and
island (or alternatively cradle) or between integrated drip-tray and island (or
alternatively cradle) as per instruction hereafter.
Apply suitable fuel resistant sealant on the surface of the leak-plate/integrated
drip-tray, apply suitable fuel resistant sealant around fixing holes on the island as
per below sketch - sealant represented by blue line.
To Next Page
Loading...
