Tomey RC-5000 User Manual

3-29
d) KRT Setup: Keratometer setup
The measurement conditions for keratometer measurement
are set up.
Measurement times
1: One measurement is made when Auto Shot is ON.
3: Three consecutive measurements are made when Auto
Shot is ON.
Unit
mm: Keratometer measurement values are displayed in
mm unit.
D: Keratometer measurement values are displayed in
D unit.
Measurement Part Ø
The keratometer measurement part is set.
3: Measurement is taken for the part Ø3 from the cor-
neal apex.
3&6: Both Ø3 and Ø6 part from the corneal apex are mea-
sured at the same time.
6: The part of Ø6 from the corneal apex is measured.
Diopter Step
Step setting for Kerato measurement. (only Diopter)
0.25 / 0.01
Axis Step
Step setting for Axis value.
1 / 5
ԙ
Ԙ
Ԛ
-GTCVQ
ԛ
Ԝ
3.8 SETUP OF MEASUREMENT CONDITIONS
(Fig. 1)

Tomey RC-5000 Specifications

General

Brand	Tomey
Model	RC-5000
Category	Measuring Instruments
Language	English