3-30
e) Output Setup
The output of the measured data is set.
Print
ON: The measured data is printed by built-in printer.
OFF: Printing is disable.
Auto Print
ON: The Auto Print function is enable.
OFF: The Auto Print function is disable.
Print Form
The print mode of the built-in printer is set.
Pressing the Print Form button $displays the Print Form
screen (Fig. 2). Sixteen setup items are used which are di-
vided into four screens, of which screen movement is carried
out by Arrow Mark buttons %. The Ongoing screen is iden-
tified in the upper part of the screen. As for the details of each
item, see "3.4.2. Print mode".
Pressing CL List button & on the 3/4 screen (Fig. 4) dis-
plays the list of contact lenses which are used to select the
brand name of the contact lenses which will be displayed (Fig.
5 CL List Select).
Ԙ
1WVRWV
ԝԙ
Ԛ
(Fig. 1)
(Fig. 2)
(Fig. 3)
(Fig. 4)
3.8 SETUP OF MEASUREMENT CONDITIONS
To Next Page
Loading...
