8-6
GUIDANCE AND MANUFACTURER'S DECLARATION
ELECTROMAGNETIC IMMUNITY
The RC-5000 intended for use in the following electromagnetic environments. The customer and
the user of the RC-5000 is advised to guarantee its use in the following environments.
Electromagnetic environments-
guidance
Conductive RF
IEC 61000-4-6
Radiated RF
IEC 61000-4-3
Immunity test IEC 60601 Test
level
Compatibility
level
3 V rms
150kHz to
80MHz
3 V/m
80MHz to
2,5GHz
3 V
3 V/m
It is preferable that the portable type or
movable type RF communication equip-
ment should not be used for any part of the
RC-5000 including the cables, within the
recommended separation distance which is
calculated by the formula applicable for the
frequency of the transmission equipment
Recommended separation distance
d =1.2 P
d =1.2 P
80 MHz to 800 MHz
d =2.3 P 800 MHz to 2.5 GHz
where, "P" is the maximum output rating
for the transmitter of which is expressed in
watts (W) as specified by equipment manu-
facturer and "d" is the recommended sepa-
ration distance expressed in the unit of
meter(m).
The intensity of electromagnetic field
emitted from the fixed transmitter is deter-
mined by field examination value
"a"
obtained from the electromagnetic field,
which is preferred to be les than the com-
patibility level for each frequency range of
.
" b"
Interference may occur close to the equip-
ment identified with the following mark.
Remark 1: Higher frequency is applied at 80MHz and 800MHz.
Remark 2: The guidance is not always applicable for all conditions. Electromagnetic transmission
is influenced by absorption and reflection from structure, objects, and human body.
8.5 EMC COMPATIBILITY DECLARATION
Table 204
To Next Page
Loading...
Need help?
General
