EasyManuals Logo

Topcon DS Series User Manual

Topcon DS Series
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
4
2. PRECAUTIONS
Charging Battery
Be sure to charge the battery within the charging temperature range.
Charging temperature range: 0 to 40°C
Warranty policy for Battery
Battery is an expendable item. The decline in retained capacity depending on the repeated charging/
discharging cycle is out of warranty.
Bluetooth Wireless Technology
Bluetooth function may not be built in depending on telecommunications regulations of the country
or the area where the instrument is purchased. Contact your local dealer for the details.
Telescope
Aiming the telescope at the sun will cause internal damage to the instrument. Use the solar filter
when observing the sun.
"27. OPPTIONAL ACCESSORIES"
Tribrach Clamp and Handle
When the instrument is shipped, the tribrach clamp is held
firmly in place with a locking screw to prevent the
instrument from shifting on the tribrach. Before using the
instrument the first time, loosen this screw with a
screwdriver. And before transporting it, tighten the locking
screw to fasten the tribrach clamp in place so that it will not
shift on the tribrach.
The handle of the instrument can be removed. When
operating the instrument with the handle attached, always
make sure that the handle is securely fixed to the
instrument body with the handle locks.
Precautions concerning water and dust resistance
The instrument conforms to IP65 specifications for waterproofing and dust resistance when battery
cover, connector cap and the external interface hatch are closed.
Be sure to correctly attach the connector caps to protect the instrument from moisture and dust
particles when the connector is not in use.
Make sure that moisture or dust particles do not come in contact with the terminal or connectors.
Operating the instrument with moisture or dust on the terminal or connectors may cause damage to
the instrument.
Make sure that the inside of the carrying case and the instrument are dry before closing the case. If
moisture is trapped inside the case, it may cause the instrument to rust.
If there is a crack or deformation in the rubber packing for the battery cover or external interface
hatch, stop using and replace the packing.
To retain the waterproof property, it is recommended that you replace the rubber packing once every
two years. To replace the packing, contact your local sales dealer.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Topcon DS Series and is the answer not in the manual?

Topcon DS Series Specifications

General IconGeneral
BrandTopcon
ModelDS Series
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals