Topcon DS Series - 25 Power Supply System

173
25.POWER SUPPLY SYSTEM
Operate your instrument with the following combinations of power equipment.

• When using an external battery, mount the BDC70 in place to maintain the balance of the
instrument.
• Never use any combination other than those indicated below. If you do, the instrument could be
damaged.
Those indicated by * are standard accessories. Others are optional accessories.

• Dedicated power cables differ according to the country or the area where the instrument is used.
Contact your local dealer for the details.
• By using the Y cable the instrument can perform RS232C communication (D-sub 9-pin) at the same
time as connecting to an external power source.
BDC70 CDC68A
('&
WR9$&
&'&
('&
('&
9'&
EDC113A/C
(110 to 240 VAC)
etc.
ChargerExternal battery
For car cigarette lighter
AC/DC converter
Battery* Charger* Power cable*
%74$
9'&$K
Interface cable
('&
('&
<&DEOH
('&
('&
WR9$&
('&
<&DEOH
Power cable
('&
Power cable
Interface cable
AC/DC converter
Car battery