28
5. BASIC OPERATION
Via Starkey mode, you can jump from each basic mode screen to the screen of checking/changing the
various settings directly. Press starkey {
★ } to enter Starkey mode. Each icon can be tapped or
pressed and hold in the same way with status bar.
• 12 icons allocated in Starkey mode and the above 8 icons correspond with that status bar
• Allocation of the icons can be changed.
Changing allocation of Starkey mode: "22.7 Changing Starkey Mode Icons"
Indicates the current status of the instrument.
Tapping icons will switch between the relevant options for that item. Tapping and holding will display
a list of all available options for that item and, in certain cases, a link to the configuration screen for
that item. (The numbers correspond to above icons).
(1) Battery icon
Remaining battery power indicator (BDC70/external battery BT-73QA, Temperature = 20°C, EDM
on).
The remaining battery power displayed when distance measurement is in progress may differ to
that displayed at other times.
: Level 3 Full power
: Level 2 Plenty of power remains
: Level 1 Half or less power remains
: Level 0 Little power remains Prepare a replacement battery.
(Flashes red and black)
: No power Stop operation and charge the battery.
(Red display in the center of the screen)
"6.1 Battery Charging"
5.4 Starkey Mode
(1) (2) (3) (4)
(5) (6) (7) (8)
(9) (10)
(11) (12)
when instrument was shipped.
11 and 12 are not allocated
To Next Page
Loading...
Need help?
General
