Topcon DS Series - Page 147

140
22. CHANGING THE SETTINGS
PROCEDURE Allocating tabs
1. Select "Customize" to display <Customize/Select
screen>.
Select the measurement mode in which you want
to allocate a tab.
Select "Tab page".
2. Use the softkeys ([ADD], [DEL] etc.) in
<Customize tab page> to allocate the desired tab
page layout.
•Press [ADD] to add the selected tab at the right-
hand side of the screen.
•Press [INS] in the second page to insert the
selected tab in front of the current tab.
•Press [CNFG] in the second page to replace the
current tab with the selected tab.
•Press [DEL] to delete the current tab.

• Tabs, once deleted, cannot be retrieved.