4. PRODUCT OUTLINE
11
Instrument height mark
The height of the instrument is as follows:
• 196mm (from tribrach mounting surface to this mark)
"Instrument height" is input when setting instrument station data and is the height from the
surveying point (where the instrument is mounted) to this mark.
Laser-pointer function
A target can be sighted with a red laser beam in dark locations without the use of the telescope.
Camera
By the built-in camera, the view from the camera is displayed on the screen in conjunction with
the telescope reticle and measurement values, which helps you to sight the target roughly.
Vertical and Horizontal Jogs
The instrument and telescope can be rotated manually by hand or, for more precise adjustments,
by turning the vertical and horizontal Jogs.
The faster the Jogs are turned, the faster the instrument and telescope rotate.
"11.1 Auto Pointing Settings" step 3
Trigger key
When the Trigger key is pressed the instrument carries out the operation indicated by the softkey
in bold type on the screen. This allows the user to continue operation without having to return to
the display to press softkeys.
Sighting collimator
Use sighting collimator to aim the instrument in the direction of the measurement point.
Turn the instrument until the apex of the triangle in the sighting collimator is aligned with the
target. A circle surrounds the triangle to make it easier to locate.
To Next Page
Loading...
Need help?
General
