i
HOW TO READ THIS MANUAL
Thank you for selecting the DS-201i/202i/203i/205i.
• Please read this Operator’s manual carefully, before using this product.
• DS has a function to output data to a connected host computer. Command operations from a host
computer can also be performed. For details, refer to "Communication manual" and ask your local
dealer.
• The specifications and general appearance of the instrument are subject to change without prior
notice and without obligation by TOPCON CORPORATION and may differ from those appearing in
this manual.
• The content of this manual is subject to change without notice.
• Some of the diagrams shown in this manual may be simplified for easier understanding.
• This manual is protected by copyright and all rights are reserved by TOPCON CORPORATION.
• Except as permitted by Copyright law, this manual may not be copied, and no part of this manual
may be reproduced in any form or by any means.
• This manual may not be modified, adapted or otherwise used for the production of derivative works.
Symbols
The following conventions are used in this manual.
: Indicates precautions and important items which should be read before
operations.
: Indicates the chapter title to refer to for additional information.
: Indicates supplementary explanation.
: Indicates an explanation for a particular term or operation.
[Softkey] etc. : Indicates softkeys on the display and window dialog buttons.
{Key} etc. : Indicates keys on the operation panel.
<Screen title> etc. : Indicates screen titles.
Turning using the Remote Controller system (option)
• Turning using the Remote Controller and RC Handle is an optional function.
• To use Turning function using the Remote Controller system, change the standard Handle to the RC
Handle (optional accessory). Setting change is also required.
Changing the handle: "4.1 Parts of the Instrument Detaching/attaching the Handle",
RC Handle setting: "22.2 Instrument Configuration",
RC Handle: "27. OPPTIONAL ACCESSORIES"
To Next Page
Loading...
Need help?
General
