Topcon DS Series User Manual

11. TARGET SIGHTING
69
 Sighting manually
When sighting manually, set "Search Setting" to "None" in <Motor Configuration> Configuration
tab, then use the Sighting collimator to bring the target into the field of view. When the target is
in the field-of-view, use the Jogs to make fine adjustments and accurately sight the center of the
prism.
It is recommended that a slow Jog turning speed is used for greater stability when performing
fine adjustments.

Topcon DS Series Specifications

General

Brand	Topcon
Model	DS Series
Category	Measuring Instruments
Language	English