12. MEASUREMENT WITH AUTO TRACKING
71
Configuration tab: "11.1 Auto Pointing
Settings"
2. Set the area in which to perform target sighting in
the Search area tab.
Search area tab: "11.1 Auto Pointing
Settings" Step 2
3. When necessary, set the Jog turning speed for
vertical and horizontal rotation of the telescope.
JOG Setting tab: "11.1 Auto Pointing
Settings" step 4
•Press [INIT] to return JOG Setting tab settings
only to their factory settings.
4. Set "Forecast time" and "Wait time".
"Forecast time", "Wait time": Lost Prism
Items set and options (*: Factory setting)
(1) Forecast time : 0.5 sec./1 sec./2 sec.*/
3 sec./4 sec./5 sec./
Auto
(2) Wait time (sec.) : 0 to 3600 (5*)
• When setting "Wait time", [HOLD] is displayed.
Press [HOLD] to set "Wait time" to no limits.
" Lost Prism"
5. Press [OK].
To Next Page
Loading...
Need help?
General
