Topcon ES-65 - Page 71

6-13
6 SPECIAL MODE (Menu Mode)
 To change the display unit
It is possible to change the displayed area unit.
When 3 or more points are measured, the area
surrounded by the points is calculated and the
result will be shown.
*1) Measurement is Fine N-times measurement mode.
Operating procedure Operation Display
1 Press the {F3} (UNIT) key.
{F3}
2 Select a unit by pressing the {F1} to {F4} key.
Example: {F2} (ha) key.
{F2}
 m.sq: square meter ha: hectare ft.sq: square feet acre: acre.
AREA 0003
234.567 m.sq
MEAS ––– UNIT NP/P
AREA 0003
100.000 m.sq
MEAS ––– UNIT NP/P
AREA 0003
100.000 m.sq
m.sq ha ft.sq acre
AREA 0003
0.010 ha
MEAS ––– UNIT NP/P