40
BASIC OPERATION
• When you select the CL data
1 The IDs of the data measured by the lens meter is displayed for the CL data.
2 Touch the ID of the patient.
3 If ID is not displayed, touch the [Reload] button.
4 Touch the [OK] button.
5 The data is registered as the eyeglass data and the lens is set in the CV-5000.
• When you select both the RM/KR data and CL data
1 Touch the IDs of the RM/KR data and CL data.
2 Select the data to be set in the CV-5000 by using the items in the initial set data.
3 Touch the [OK] button.
4 The RM/KR data and CL data are registered as the objective data and eyeglass data.
5 The lens of the selected data is set in the CV-5000.
To Next Page
Loading...
