62
SETTING AND CHANGING THE SOFTWARE
• (4) Setting the auxiliary lens
Displays the auxiliary lens to be used in the test to be executed when touching the chart.
Touch the [Aux. lens] button, and the list of auxiliary lenses is displayed.
When you want to set an auxiliary lens in advance at the start of test, select it.
• (5) Checking the chart and setting the mask
Displays the chart selected on the [Chart page registration] screen.
When you want to apply a mask and then execute the test by touching the chart, set the mask
here.
• Unregistered
You can see the unregistered charts in the list of charts. The registered chart is displayed in the
shadowed status.
• Initial Chart
Specify [Initial Chart]. So you can specify the chart and test to be started when the instrument
starts or is reset.
• Change Name
Changes the name of the each chart page.
* Contact sales person for this change.
• OK
Store the changed data and finish the procedure.
• Cancel
Cancel the changed data and finish the procedure.
To Next Page
Loading...
