Topcon KR-800A - Connecting External I;O Terminals; Data Output; Data Input

19
PREPARATIONS
CONNECTING EXTERNAL I/O TERMINALS
DATA OUTPUT
This product can be connected to a personal computer (PC) and other external devices via the RS-
232C or LAN.
1 Connect the connection cable to the output terminal of the instrument
2 Connect the other end of the connection cable to the PC, etc.
DATA INPUT
This product can be connected to a barcode reader and other external devices via USB.
1 Connect the connection cable to the input terminal of the instrument.
2 Connect the other end of the connection cable to the external device.
CAUTION
To avoid electric shock, do not touch the external connection
terminal and the patient at the same time.
NOTE
When connecting this product with a commercial personal computer, use
one conforming to IEC60950-1, with a separation unit.
CAUTION
Do not operate a touch panel during barcode data entering by
barcode reader. If you enter data when tapping the button on the
touch panel, the barcode may not be read normally.
NOTE
For questions about connections, contact your TOPCON dealer.
USB input terminal
RS-232C output terminal
LAN output terminal