Topcon KR-800A - Printout Format Setting

17
COMPONENTS
PRINTOUT FORMAT SETTING
Printout format can be changed by pushing "Print" in the Settings screen. For Print settings, see "SETTING
FUNCTIONS ON SETUP SCREEN" on page 44.
PRESET
All: Initial setting (all measurement values are printed.)
Ave: Only average values are printed.
Classic: Equivalent with RM/KR-8900 Classic 2
*: Depending on the destination, preset values differ.
ITEM INITIAL
PRESET
All Ave
Classic*
1
Common
Barcode OFF OFF OFF OFF
Operator ID OFF OFF OFF OFF
Name ON ON ON ON
Date ON ON ON ON
Date style DMY* DMY* DMY* DMY*
Patient No./Patient ID ON ON ON ON
Device ID OFF OFF OFF OFF
Serial number ON ON ON ON
Include error data OFF OFF OFF OFF
TOPCON logo ON ON ON ON
Message print OFF OFF OFF OFF
Input message NULL NULL NULL NULL
Graphic print Normal Printer Normal Printer Normal Printer Normal Printer
Line space 0 0 0 0
Auto Cut ONONONON
REF/KRT*
1
Print Layout DATA DATA DATA DATA
VD ON ON ON ON
Cylinder sign ON ON ON ON
Print form of REF result ALL ALL AVE ALL
Reliability OFF OFF OFF OFF
S.E. ON ON ON ON
PD ON ON ON ON
ADD OFF OFF OFF OFF
KRT print layout D/mm D/mm D/mm D/mm
Print form of KRT result ALL ALL AVE AVE
KRT ave. -HV or R1R2 R1R2 R1R2 R1R2 HV
KRT data -HV or R1R2 R1R2 R1R2 R1R2 HV
KRT average ON ON ON ON
KRT cylinder ON ON ON ON
Cornea diameter ON ON ON ON
REF
VD ON ON ON ON
Cylinder sign ON ON ON ON
Print form of REF result ALL ALL AVE ALL
Reliability OFF OFF OFF OFF
S.E. ON ON ON ON
PD ON ON ON ON
ADD OFF OFF OFF OFF
KRT*
1
KRT print layout D/mm D/mm D/mm D/mm
Print form of KRT result ALL ALL AVE ALL
KRT ave. -HV or R1R2 R1R2 R1R2 R1R2 HV
KRT data -HV or R1R2 R1R2 R1R2 R1R2 HV
KRT average ON ON ON ON
KRT cylinder ON ON ON ON
Cornea diameter ON ON ON ON