Topcon KR-800A - Printer Output

15
COMPONENTS
PRINTER OUTPUT
KRT typical value style and KRT print data are HV
NOTE
• The reliability factor is defined with integers 1 to 9 in increasing order of
reliability.
Additionally, if the reliability is high enough, the reliability factor is not
shown on the printout.
• The Near PD value is calculated based on the ADD.
• C mark appears when the button is selected by manual
operation.
Adding the C mark occurs only for REF measurement values.
• ( ) mark appears when it is changed to the cataract mode automatically so
that normal measurement is not performed due to a cataract and the like.
Adding the ( ) mark occurs only for REF measurement values.
1$0(
5()'$7$
ࠑ5
&
&
&
ࠒ
6
  
  
&</ 
&$
9'
BB$0
1R
.5
  
6( 
6( 
  
ࠑ/ࠒ
6



 
  
&$
  
 


 
.57'$7$
ࠑ5ࠒ
&251($',$
'
+   
 
  
9
&</  
$9(
00 $
-1-
'
+   
 
  
9
&</  
$9(
00 $
-2-
'
+   
 
  
9
&</  
$9(
00 $
-3-
'
+   
 
  
9
&</  
$9(
00 $
OID :
SN
723&21

ࠑ/ࠒ
&251($',$
'
+   
 
  
9
&</  
$9(
00 $
-1-
'
+   
 
  
9
&</  
$9(
00 $
-2-
'
+   
 
  
9
&</  
$9(
00 $
-3-
'
+   
 
  
9
&</  
$9(
00 $

3'
$'' 13'
Barcode
Work ID No.
Patient No./Patient ID
Device ID number
VD (vertex distance)
Cylinder sign
3 readings of REF right mea-
surement (recordable up to 10
measurements)
Typical value of right eye
SPHERICAL EQUIVALENT of
right eye
The ( ) mark appears when
the mode is changed to the
cataract mode automatically
during a measurement.
Pupil distance (PD value) (mm)
Near vision PD value
ADD (standard additional power)
Operator ID
Serial number
Refractive power measurement result (R)
Refractive power measurement result (L)
3 readings of kerato-cylinder
value, average value and
kerato-cylinder value
(recordable up to 10 mea-
surements each for right/left
eye)
Left eye corneal curvature
measurement
Typical measured value of right eye corneal curvature
Measured value of horizontal
corneal curvature
Measured value of vertical
corneal curvature
Corneal astigmatic axis
angle
Measured value of right
eye cornea diameter
Typical measured value of
Left eye corneal curvature
TOPCON logo mark
Reliability factor
C mark appears when the mode is changed to the
cataract mode manually during a measurement.
Cataract