Topcon KR-800A - Page 53

51
SETTING FUNCTIONS ON SETUP SCREEN
Description Options Details Initial value
REF/KRT
(Print
setting on
R/K mode)
Print Layout
R/L Measurement values are printed in terms of Right or Left.
DATA
DATA Measurement values are printed in terms of REF or KRT.
VD
OFF VD value (Vertex distance) is not printed.
ON
ON VD value (Vertex distance) is printed.
Cylinder sign
OFF Cylinder sign is not printed.
ON
ON Cylinder sign is printed.
Print form of REF result
ALL All refractive measurements are printed.
ALL
AVE Only averaged is printed.
Reliability
OFF Reliability number is not printed.
OFF
ON Reliability number is printed.
S.E.
OFF S.E. is not printed.
ON
ON S.E. is printed.
PD
OFF PD value is not printed.
ON
ON PD values is printed.
ADD
OFF ADD value is not printed.
OFF
ON ADD value is printed.
KRT print layout
D/mm
KRT data is printed as follows,
D (corneal refractive power)/mm (corneal curvature).
D/mm
mm/D
KRT data is printed as follows,
mm (corneal curvature)/D (corneal refractive power).
Print form of KRT result
ALL All measurement values are printed.
ALL
AVE Only average value are printed.
KRT ave. -HV or R1R2
HV Kerato average in print out is HV (horizontal/vertical).
R1R2
R1R2 Kerato average in print out is R1R2 (flat/steep meridian).
KRT data -HV or R1R2
HV
KRT measurement result is printed
in HV (horizontal/vertical).
R1R2
R1R2
KRT measurement result is printed
in R1R2 (flat/steep meridian).
KRT average
OFF KRT average value is not printed.
ON
ON KRT average value is printed.
KRT cylinder
OFF Kerato-cylinder value and axial angle are not printed.
ON
ON Kerato-cylinder value and axial angle are printed.
Corneal diameter
OFF Corneal diameter is not printed.
ON
ON Corneal diameter is printed.
REF
(Print
setting on
REF
mode)
VD
OFF VD value (Vertex distance) is not printed.
ON
ON VD value (Vertex distance) is printed.
Cylinder sign
OFF Cylinder sign is not printed.
ON
ON Cylinder sign is printed.
Print form of REF result
ALL All refractive measurements are printed.
ALL
AVE Only typical value is printed.
Reliability
OFF Reliability number is not printed.
OFF
ON Reliability number is printed.
S.E.
OFF S.E. is not printed.
ON
ON S.E. is printed.
PD
OFF PD value is not printed.
ON
ON PD values is printed.
ADD
OFF ADD value is not printed.
OFF
ON ADD value is printed.