Topcon KR-800A - Page 75

73
GENERAL INFORMATION ON USAGE AND MAINTENANCE
LED light source
(Infrared)
M LED (For Measurement)
Class of LED Class 3B
Output 70mW (CW)
Wavelength 870nm
Half width 50nm
Beam divergence 0.87 rad
XY LED (For XY alignment)
Class of LED Class 1
Output 6mW (CW)
Wavelength 950nm
Half width 50nm
Beam divergence 0.14 rad
ZENGAN LED (For Anterior segment observation)
Class of LED Class 1
Output 6mW (CW)
Wavelength 950nm
Half width 50nm
Beam divergence 1.40 rad
SRING LED (For Kerato ring)
Class of LED Class 1
Output 14mW (CW)
Wavelength 940nm
Half width 50nm
Beam divergence 2.09rad
SPOT LED (For parallel projection spot)
Class of LED Class 1
Output 14mW (CW)
Wavelength 940nm
Half width 50nm
Beam divergence 2.09rad
LED light source
(White)
KOSHI LED (For fixation)
Class of LED Class 1
Output 0.08mW (CW)
Wavelength (Centroid) 530nm
Beam divergence 1.05 rad
CAUTION
• Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radia-
tion exposure.
• Do not remove the enclosures. LED high-power is radiated.