Toro 04042 - While Operating the Machine

WhileOperatingtheMachine
1.Alwaysstandbehindthehandlewhenstartingandoperatingthemachine.
2.Tobeginthemachineoperation:
A.Ensurethatthemachinewireharnessisconnectedtothebatterypack.
B.CheckthatthecontrolleveronthehandleisintheNEUTRALposition
forbothtractionandreeldrives.
C.TurnthekeyswitchtotheSTARTpositionuntiltheInfoCenterdisplay
lightsup,thenreleasetheswitchtotheRUNposition.
3.Beforeleavingtheoperator’spositionofthemower:
A.Stopthemachineonalevelground.
B.Disengageboththetractionandreeldriveswiththecontrolleverand
settheparkingbrake.
C.TurnthekeyswitchtotheOFFpositionandwaitforallthemachine
movementtostop.
4.Beforeyouremovethebasketofclippings,disengagethetractionandreel
drives,settheparkingbrake,turnthekeyswitchtotheOFFpositionandwait
fortheelectricmotortostop.Waitforallthemachinemovementtostop
beforeremovingthebasket.
5.Ifthecuttingunitstrikesasolidobjectorvibratesabnormally,stopthe
machineoperationimmediately.Disengagethetraction/mowlever,turnthe
keyswitchtotheOFFposition,waitforallthemachinemovementtostop.
Then,disconnectthebatterypack(refertoConnectingtheLithiumBattery
Pack(page1–6))andinspectthecuttingunitfordamage.Adamagedreelor
bedknifemustberepairedorreplacedbeforeoperationisstarted.
6.Wheneverthemachineisleftunattended,ensurethattheelectricmotor
isstopped,cuttingunitreelisnotspinning,andkeyswitchisintheOFF
position.Removethekeyfromthekeyswitch.
Safety:SafetyInstructions
Page1–4
Greensmaster
®
eFlex1800,2100and2120
12189SLRevE