Toro 04042 - Adjustments; Adjusting the Cutting Unit Clip

Adjustments
AdjustingtheCuttingUnitClip
ThecuttingunitclipadjustmentontheeFlex1800/2100,and2120canbe
changedbyinstallingthecuttingunitdrivepulleystotheappropriatelocationson
thereeldriveassembly.Theclipfrequencypulleylocationsfor11bladeand14
bladecuttingunitsareshowninFigure20.
Toadjusttheclipfrequency,dothefollowingprocedure:
1.Parkthemachineonalevelsurface,turnthekeyswitchtotheOFFposition,
andremovethekeyfromthekeyswitch.Disconnectthebatterypack;refer
toConnectingtheLithiumBatteryPack(page4–3).
2.Removethereeldrivecoverandreeldrivebeltfromsideofthecuttingunit;
refertoReelDriveBelt(page4–14).
g203640
Figure19
1.Setscrew(2each)
4.Reeldrivebelt
2.Pulley
5.Woodruffkey
3.Reeldrivecover
3.Loosenthe2setscrews(item1inFigure19)fromthedrivepulleysthatare
toberemoved.Slidethepulleysfromtheshafts.
TractionandReelDriveSystem:Adjustments
Page4–10
Greensmaster
®
eFlex1800,2100and2120
12189SLRevE