Toro 04042 - Servicing the Bedknife

ServicingtheBedknife
g251263
Figure161
eFlex2100/2120shown
1.Screw(13each)3.Bedknife
2.Bedbar
RemovingtheBedknife
1.Removethebedbarfromthecuttingunit;refertoRemovingtheBedbar
(page7–10).
Note:EFlex1800cuttingunitsuse11screwstosecurebedknifetobedbar.
EFlex2100/2120cuttingunitsuse13screwstosecurebedknifetobedbar.
2.Removethescrewsfromthebedbarwithasocketwrenchandabedknife
screwtool;refertoBedknifeScrewT ool(page2–17).Discardthescrews.
Removethebedknifefromthebedbar.
3.RefertoGrindingtheBedknife(page7–14)foradditionalinformation.
InstallingtheBedknife
1.Useascrapertoremoveallrust,scaleandcorrosionfromthebedbar
surfaceunderthebedknife.Lightlyoilthebedbarsurfacebeforeinstalling
thebedknife.
2.Makesurethatscrewthreadsinbedbar(5/16-18UNC-2A)areclean.
g226894
Figure162
Greensmaster
®
eFlex1800,2100and2120
Page7–13
CuttingUnit:ServiceandRepairs
12189SLRevE