Toro 04042 - Leveling the Rear Roller

LevelingtheRearRoller
g206879
Figure155
1.Shoulderbolt(4each)2.Sideplate(right)
Theprecisionmachinedcomponentsofthecuttingunitframekeeptherear
rollerandcuttingunitinalignment(parallel).Ifthesideplatesaredisassembled,
ensurethattherearrollerisproperlyalignedtothereel.Thereelshouldnot
haveanyconetothisprocedure.
1.Placetheassembledcuttingunitonasurfaceplate.
2.Ensurethatthebedknifeisproperlyadjustedtothecuttingunit.
3.Usethesurfaceplate,checkiftherearrollerisleveltothecuttingunitby
usinga0.13mm(0.005inch)shimateachendoftherearroller.Iftheshim
willpassundertherolleratoneendbutnottheother,aframeadjustment
shouldbemade.
4.Loosen,butdonotremovethe2shoulderboltsthatsecurethesideplateto
theframeoppositethesidethatisnotlevel(Figure155).
5.Adjustthepositionofthesideplatetoparalleltherearrollerandcuttingunit.
Torquetheshoulderboltsto24to27N∙m(210to240in-lb).
6.Aftertighteningthesideplate,checktherearroller.Ifnecessary,loosenand
adjustthesecondsideplate.
7.Afterlevelingtherearroller,completethecuttingunitset-upandadjustment
sequence.
Greensmaster
®
eFlex1800,2100and2120
Page7–7
CuttingUnit:Adjustments
12189SLRevE