Toro 04042 - Page 228

InstallingtheBedknife(continued)
IMPORTANT
Donotuseanimpactwrenchtotightenscrewsintothebedbar.
3.Usenewscrewstosecurebedknifetobedbar.Applyanti-seizelubricantto
thethreadsofnewscrews.Donotapplyanti-seizelubricanttothetaper
ofthescrewheads.
4.Installallscrewsbutdonottighten.
5.Usingatorquewrenchandbedknifescrewtool,tightenthe2outerscrews
to1N-m(10in-lb).
6.Workingfromthecenterofthebedknifetowardeachend,tightenscrews
from23to28N-m(200to250in-lb).
7.Afterinstallingthebedknifetobedbar,grindthebedknife.
GrindingtheBedknife
BedknifeGrindingSpecications
StandardBedknifeReliefAngle3°minimum
FairwayBedknifeReliefAngle3°minimum
ExtendedBedknifeReliefAngle7°minimum
FrontAngleRange
13°to17°
g207289
Figure163
1.T opangle
4.Frontsurface
2.T opsurface
5.Frontangle
3.Removeburr
Sincetherecanbevariationsinthemountingsurfaceofthebedbar,itis
necessarytogrindthebedknifeafterinstallingittothebedbar.Follow
thebedknifegrindingspecicationsprovided;refertoBedknifeGrinding
Specications(page7–14).Grindonlyenoughsothetopsurfaceofthebedknife
istrue;refertoFigure163.
g227152
Figure164
1.Bedknife2.Servicelimit
CuttingUnit:ServiceandRepairs
Page7–14
Greensmaster
®
eFlex1800,2100and2120
12189SLRevE