Toro 08743 - Page 154

RemovingandInstallingtheTractionReliefManifold(continued)
7.Ifthehydraulicttingsaretoberemovedfromthemanifold,markthetting
orientationforassemblypurposesandremovethettingsfromthemanifold.
DiscardtheO-ringsfromthettings.
8.Ifthehydraulicttingswereremovedfromthemanifold,lubricatenewO-rings
withcleanhydraulicuid,positiontheO-ringstothettings,andinstallthe
ttingsinthemarkedorientation;refertoInstallingtheHydraulicFittings
(SAEStraightThreadO-RingFittings)(page5–9).
9.Securethemanifoldassemblytothebracketwiththepreviouslyremoved
fasteners.
10.Removethecapsandplugsthenconnectthehydraulichosestothemanifold
ttings;refertoInstallingHydraulicHosesandTubes(O-RingFaceSeal
Fitting)(page5–7).
11.Chargethehydraulicsystem;refertoChargingtheHydraulicSystem(page
5–64).
HydraulicSystem:ServiceandRepairs
Page5–84
SandPro
®
3040and5040
20251SLRevA