Toro 08743 - Hydraulic Fluid Cooler

HydraulicFluidCooler
g349636
Figure50
1.CenterShroud5.Elbowtting9.Rubberclamp(2each)
2.DashShroud6.Elbowtting(model08743)
10.Fanshroud
3.Rearfueltankclamp(2each)7.T eetting(model08745)11.Coolerpanel
4.DashPanel
8.Hydraulicuidcooler
RemovingandInstallingtheHydraulicFluidCooler
RefertoFigure50forthisprocedure.
1.Parkthemachineonalevelsurface,loweranyattachments,engagethe
parkingbrake,setthekeyswitchtotheOFFpositionandremovethekey
fromtheswitch.
2.Removethecentershroud(above)andthecoolerpanel(below)fromthe
machine.
3.Removethe3screwsthatsecurethedashpaneltothemachine,then
carefullyraisethedashpaneltoaccesstherearfueltankclamps.Remove
therearfueltankclamps.
HydraulicSystem:ServiceandRepairs
Page5–68
SandPro
®
3040and5040
20251SLRevA