Toro 08743 - Rear Remote Hydraulics (Optional) or Switch Kit (Optional) Hydraulic Pump

RearRemoteHydraulics(Optional)orSwitchKit(Optional)
HydraulicPump
g353005
Figure71
(rearremotehydraulicskitshownwithhitchremoved)
1.Squarekey7.Barbtting–suction13.Capscrew(2each)
2.Rubberbushing8.Hoseclamp
14.Washer(2each)
3.Coupler9.Capscrew(2each)
15.Bracket
4.Setscrew(4each)
10.Hydraulicpump
16.Suctionhose
5.Flangenut(2each)11.Elbowtting
17.Hydraulichose
6.Squarekey
12.T orquearm
RefertoServicingtheOptionalRearRemoteHydraulicsorOptionalSwitchKit
HydraulicPump(page5–114)forpumpserviceinformation.
RemovingtheOptionalHydraulicPump
Note:RefertoFigure71forthisprocedure.
1.Parkthemachineonalevelsurface,loweranyattachments,setthekey
switchtotheOFFpositionandremovethekeyfromtheswitch.
2.Youmaywanttoremovethehitchassemblytoimproveaccesstothe
optionalhydraulicpump;refertoRemovingandInstallingtheHitchAssembly
(page7–22).
3.ReadandadheretotheinformationprovidedinGeneralPrecautionsfor
RemovingandInstallingtheHydraulicSystemComponents(page5–54).
4.Cleanthehydraulicpumpandallhydraulicconnectionstopreventhydraulic
systemcontamination.
5.Disconnectthehydraulichosesfromthettingsonthehydraulicpumpand
allowthehydrauliclinestodrainintoasuitablecontainer.
6.Installcleancapsorplugsonthettingsandinthedisconnectedhosesto
preventcontamination.
HydraulicSystem:ServiceandRepairs
Page5–112
SandPro
®
3040and5040
20251SLRevA