Toro 08743 - Page 203

TestingtheStarterSolenoid(continued)
8.Replacethestartersolenoidifnecessary.
9.Ifthestartersolenoidtestscorrectlyandacircuitproblemstillexists,check
thewireharnesses;refertoAppendixA(pageA–1).
10.Reconnectthewiresandcablestothestartersolenoid.Tightenthenutson
thecoilpostsfrom1.7to2.3N·m(15to20in-lb),andthenutsonthemain
contactpostsfrom5.7to6.8N·m(50to60in-lb).Applybatteryterminal
protectortothestartersolenoidpostsbeforeinstallingtheboots;referto
BatteryTerminalProtector(page2–17).
11.Connectpositivebatterycabletobatteryrstandthenattachnegativebattery
cable;refertoRemovingandInstallingtheBattery(page6–31).
SandPro
®
3040and5040
Page6–13
ElectricalSystem:TestingtheElectricalComponents
20251SLRevA