Toro 08743 - Page 237

RemovingTractionPedalandControlComponents(continued)
CAUTION
Theextensionspringisundertension.Usecautionwhenremoving
thespringtoavoidpersonalinjury.
5.Loosentheadjustmentpinlocknuttoallowtheextensionspringtorelax.
Unhookthespringfromtheneutralarm.
6.Disassembletheremainingtractionpedalandcontrolcomponentsas
necessary.
InstallingTractionPedalandControlComponents
RefertoFigure93forthisprocedure.
1.Assemblethetractionpedalandcontrolcomponentsasnecessary.
•Apply#2generalpurposegreasetothetractionstudpriortoassembly.
•Ifthepumpinputcamwasremoved,applymediumstrengththreadlocking
compoundtotheclampingscrewpriortoinstallation.
•Ifthepumpplatewasremoved,tightenthefastenersthatsecurethepump
platetothepistonpumpfrom15to24N·m(11to18ft-lb).
CAUTION
Theextensionspringisundertension.Usecautionwheninstalling
thespringtoavoidpersonalinjury.
2.Installtheextensionspringandtightentheadjustmentpinlocknutuntil4.6
to11.0mm(0.18to0.43inch)oftheadjustmentpinthreadsextendbeyond
thelocknut.
g349781
Figure94
1.Extensionspring3.Adjustmentpin
2.Neutralarm4.Locknut
3.Installthedamper.
SandPro
®
3040and5040
Page7–11
Chassis:ServiceandRepairs
20251SLRevA