Toro 08743 - Page 25

StandardTorqueforDry,ZincPlated,andSteelFasteners(Inch)
(continued)
Note:Thetorquevaluesmustbereducedwheninstallingthefastenersintothreadedaluminumor
brass.Thespeciedtorquevalueshouldbedeterminedbasedonthealuminumorbasematerial
strength,fastenersize,lengthofthreadengagement,etc.
Note:ThenominaltorquevalueslistedaboveforGrade5and8fastenersarebasedon75%ofthe
minimumproofloadspeciedinSAEJ429.Thetoleranceisapproximately±10%ofthenominal
torquevalue.Thethinheightnutsincludejamnuts.
SandPro
®
3040and5040
Page2–9
SpecicationsandMaintenance:TorqueSpecications
20251SLRevA