Toro Reelmaster 5200-D - Page 121

Reelmaster 5200-D/5400-D Hydraulic SystemPage 4 - 77
2. Install front center lift cylinder (Fig. 97).
A. Insert cylinder pin through the carrier frame and
cylinder clevis. Secure self tapping screw to the cyl-
inder pin and carrier frame.
B. Insert cylinder pin with attached retaining ring
and thrust washer through the lift arm and cylinder
clevis. Secure thrust washer and retaining ring to the
cylinder rod end pin.
3. Install front right or left lift cylinder.
A. Insert cylinder pin through carrier frame and cyl-
inder clevis. Secure self tapping screw to cylinder pin
and carrier frame (Fig. 96).
B. Insert cylinder pin with attached retaining ring
and thrust washer through the lift arm and cylinder
clevis. Secure thrust washer and retaining ring to the
cylinder rod end pin (Fig. 96 and 95).
1. Retaining ring
2. Cylinder cap end pin
3. Frame
4. Retaining ring
5. Cylinder rod end pin
6. thrust washer
7. Lift arm
Figure 98
1 2
4 5 6
7
3
Hydraulic
Systems