Toshiba Bar Code Printer - Page 36

36
 Log Options (Effective only in Administrator mode)
Displays the [Log Options] shown in the right side when
[Property] – [Log Options] on the [List View] screen are
selected or when the icon in the task tray is right-clicked,
and [Property] – [Log Options] are selected.
Makes setting for log output of surveillance result.
Note: To use the log output feature, the printer must be
monitored using the Trap Notification feature. For details,
refer to [Trap Notification] of Surveillance Options.
 [Trap Notification Record]
Outputs a trap notification to a log in the order received.
 [File Name]
Enabled when [Trap Notification Record] is enabled.
A name of a log file, where trap notifications received
are output, is entered.
 [Max Size]
Enabled when [Trap Notification Record] is enabled.
The maximum size of a log file is set. When the size of the log file exceeds the maximum size set,
data is deleted from the oldest.
 [Event]
Enabled when [Trap Notification Record] is enabled.
A type of received trap notification to be output to a log is selected.
Trap Notification Trap Notification Record (Log) Error Info Job Info
Reset Cold Start
Output Output
Refresh Warm Start
Output Output
Print end printer job end Not output
Output
Paper end PAPER END
Output
Not output
Ribbon end RIBBON END
Output
Not output
Ribbon error RIBBON ERROR
Output
Not output
Head open HEAD OPEN
Output
Not output
Command error COMMAND ERROR
Output
Not output
Communication error COMMUNICATION ERROR
Output
Not output
Paper jam PAPER JAM
Output
Not output
Head broken elements error HEAD BROKEN ELEMENTS ERROR
Output
Not output
Cutter error CUTTER ERROR
Output
Not output
Excessive temperature error HEAD TEMP ERROR
Output
Not output
Cover open COVER OPEN
Output
Not output
Printer error PRINTER ERROR
Output
Not output
Memory error MEMORY ERROR
Output
Not output
RFID error RFID ERROR
Output
Not output