05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptabl
e value
SRAM Contents
Proce
dure
20L
23L /
25L
20H
23H /
25H
05 Adjustment
mode
Scanner Scanner 3306 - LED (R1) current
effective value setting
(clolor scanning)
128 0-255 M It will become bright if a value is enlarged.
The light is put out by 0.
1
YY
05 Adjustment
mode
Scanner Scanner 3307 - LED (G1) current
effective value setting
(clolor scanning)
128 0-255 M It will become bright if a value is enlarged.
The light is put out by 0.
1
YY
05 Adjustment
mode
Scanner Scanner 3308 - LED (B1) current
effective value setting
(clolor scanning)
128 0-255 M It will become bright if a value is enlarged.
The light is put out by 0.
1
YY
05 Adjustment
mode
Printer Laser PPC Reproduction
ratio
correction
value in
primary
scanning
direction
4000 - Fine adgustment of
image writing
frequency (PPC)
125 0-255 M 1Step0.05%.
If this value is 128, frequency is same as 05-4001. If it is not
128, that difference is added to 05-4001.
If the value increases, magnification also increases (the
dimension E will be longer).(0.6mm/4 steps)
1
YY
05 Adjustment
mode
Printer Laser PRT Reproduction
ratio
correction
value in
primary
scanning
direction
4001 - Fine adjustment of
polygonal motor
rotation speed
(adjustment of primary
scanning direction
reproduction ratio)
125 0-255 M 1Step0.05%
If the value increases, magnification of the dimension A
becomes bigger (longer).(0.4mm/4 steps)
1
YY
05 Adjustment
mode
Printer Laser PPC 4005 - Laser writing start
position
150 0-255 M When the value increases by "1", the writing start position
shifts to the front side by approx. 0.0423 mm.
1
YY
05 Adjustment
mode
Printer Laser PRT 4006 - Laser writing start
position
150 0-255 M When the value increases by "1", the writing start position
shifts to the front side by approx. 0.0423 mm.
1
YY
05 Adjustment
mode
Printer Image PPC/PRT Reproduction
ratio in the
secondary
scanning
direction (For
resolutions in
inches)
4009 - Fine adjustment of the
rotational speed of the
main motor
126 0-255 M When the value increases by "1", the reproduction ratio
of secondary scanning direction increases by approx.
0.14mm/step.
1
YY
e-STUDIO2006/2306/2506/2007/2307/2507
SELF-DIAGNOSIS CODE (03/04/05/08 CODE)
14-1-10
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
To Next Page
Loading...
