Toshiba E-STUDIO4508A - 4.5.2 Bypass feed roller

4
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
4 - 39
4.5.2 Bypass feed roller
(9) Remove the arm [9] and paper holder
release levers [10].
Fig. 4-101
(10) Disconnect 1 connector and take off the
bypass tray unit [6].
Fig. 4-102
(1) Open the bypass tray [1].
(2) Tip the paper holder release lever [2] to
release the pressure.
Fig. 4-103