e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
SELF-DIAGNOSTIC MODE
5 - 38
5.12.3 Checking of the LCD display, hard keys and digital keys
[A] Checking of the LCD display
By pressing the icon on the touch panel, the LCD display confirmation screen is displayed.
[Tips]
• The screen is returned to this one when the [HOME] button is pressed on each screen.
[B] Checking of the hard keys
By pressing each hard key, a particular text is displayed and the blinking condition of the LED is
changed.
The following table shows each text and performance when the key is pressed.
The text is displayed only while the key is being pressed. Each LED is turned OFF only while the key is
being pressed.
Hard key Text Performance
ON/OFF
(Pressing for at least
0.5 seconds)
MAIN POWER The [MEMORY RX] LED is turned OFF.
ENERGY SAVER ENARGY SAVER The [ENERGY SAVER] LED is turned OFF.
ACCESS ACCESS The [PRINT DATA] LED is turned OFF.
HOME HOME The [!] LED is turned OFF.
Programable key 1 P-1 The LCD back light is made darker by each
pressing. (10 levels)
Programable key 2 P-2 The LCD back light is made lighter by each
pressing. (10 levels)
FUNCTION CLEAR FUNCTION CLEAR The [FUNCTION CLEAR] LED is turned
OFF.
START START The [START] LED is turned OFF.
To Next Page
Loading...
