Toshiba E-STUDIO4508A - 5.14 [74 HDD assist mode]; 5.14.1 Overview; 5.14.2 Operation procedure

To Next Page

To Previous Page

SELF-DIAGNOSTIC MODE

5 - 44

5.14 [74 HDD assist mode]

5.14.1 Overview

This mode is available only when the security HDD (ADI-HDD) is mounted in the equipment. It enables

you to check the type of the mounted HDD, revert the ADI-HDD to the factory default or remove keys.

Functions of 74 HDD assist mode

• Checks the type (ADI or SATA) of the mounted HDD.

• Disposes of ADI-HDD data safely without any of leakage.

• Deletes image data when reusing a used ADI-HDD.

5.14.2 Operation procedure

(1) Perform [HS-74] by pressing the [74 HDD Assist mode] icon.

Then the type of the mounted HDD is checked and either of the following screens is displayed.

• When the security HDD is mounted

Fig.5-28

• When a normal HDD is mounted

Fig.5-29

HDD Assist Mode (4C)

System Firmware Version: XXXXXXCurrent HDD Type : ADI HDD

Select Menu

Cancel

Remove

Key

Revert

Factory Initial

Status HDD

