Toshiba E-STUDIO4508A - 4.12.2 Bypass feed clutch (CLT2)

4
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
4 - 151
4.12.2 Bypass feed clutch (CLT2)
(1) Remove the automatic duplexing unit.
 P. 4-149 "4.12.1 Automatic duplexing unit
(ADU)"
(2) Release the harness [1] from the harness
guide.
Fig. 4-405
(3) Remove 1 screw and take off the clutch
cover [2].
Fig. 4-406
(4) Remove 1 bushing [3] and 1 leaf spring [4].
Fig. 4-407