Toshiba E-STUDIO4508A - 4.7.7 Needle electrode

4
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
4 - 93
4.7.7 Needle electrode
(1) Remove the main charger grid.
 P. 4-92 "4.7.5 Main charger grid"
(2) Remove the main charger cleaner.
 P. 4-92 "4.7.6 Main charger cleaner"
(3) Release the latch and remove the terminal
cover [1] at front side.
(4) Remove the terminal cover [2] at rear side.
Fig. 4-251
(5) Remove the terminal [3] and spring [4]. Then
take off the needle electrode [5].
Fig. 4-252