e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 88
4.7.2 Drum cleaner unit
(1) Remove the process unit.
( P. 4-87 "4.7.1 Process unit")
(2) Remove the harness cover [1] by sliding it
downward.
Fig. 4-239
(3) Disconnect 1 connector.
Fig. 4-240
(4) Disconnect 2 connectors.
Fig. 4-241