Toshiba E-STUDIO4508A - 4.11.7 Reverse gate solenoid (SOL1) <35 ppm;45 ppm;50 ppm>

4
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
4 - 145
4.11.7 Reverse gate solenoid (SOL1) <35ppm/45ppm/50ppm>
(1) Remove the reverse motor unit.
 P. 4-144 "4.11.6 Reverse motor (M13)
<35ppm/45ppm/50ppm>"
(2) Remove 2 screws and take off the cover [1].
Fig. 4-388
(3) Remove the harness from the harness guide.
(4) Remove the 1 spring [2].
Fig. 4-389