Toshiba E-STUDIO4508A - 4.10.11 Pressure roller

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 134
4.10.11 Pressure roller
(1) Remove the front side cover.
 P. 4-123 "4.10.2 Front side cover"
(2) Remove the rear side cover.
 P. 4-123 "4.10.3 Rear side cover"
(3) Remove 2 screws and take off the pressure
roller cover [1].
Fig. 4-362
(4) Remove 2 springs [2].
Fig. 4-363