Toshiba E-STUDIO4508A - 4.8.8 Mixer

4
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
4 - 111
4.8.8 Mixer
(1) Take off the developer sleeve.
( P. 4-107 "4.8.7 Guide roller / Developer
sleeve")
(2) Take off the doctor sleeve.
Fig. 4-303
(3) Remove 2 screws and take off the holder.
Fig. 4-304
(4) Remove 2 bushings and 2 oil seals from the
holder.
(Replacement of Oil Seal:  P. 4-113 "4.8.9
Replacement of oil seal")
Fig. 4-305
Doctor sleeve
Holder
Oil seal
Bushing