4
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
4 - 107
4.8.7 Guide roller / Developer sleeve
(1) Remove the developer material.
( P. 4-104 "4.8.2 Removing developer
material")
(2) Remove 2 screws and take off the recovered
toner supply unit.
Fig. 4-289
(3) Remove 1 screw and take off the recovered
toner drive unit. Remove 1 gear.
Fig. 4-290
(4) Remove 2 plate springs fixing the doctor
sleeve on its both ends.
Fig. 4-291
Recovered toner
supply unit
Gear
Recovered toner drive unit
Plate spring
Plate spring
To Next Page
Loading...
