e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
REPLACEMENT OF PC BOARDS/HDD
9 - 34
9.2.10 Firmware confirmation after the PC board/HDD/SSD replacement
After replacing the PC board/HDD/SSD, check the firmware version in the setting mode (08) and
confirm if the firmware combination is correct.
The installed ROM versions and the registered optional Electronic License Keys can be confirmed in
the list print mode following the procedure below.
(1) Perform [FS-30-111] to print out VERSION LIST.
* It is recommended to keep this list for future reinstallation such as the replacement of the SYS
board.
(2) Keep pressing the [ON/OFF] button until you hear a sound to shut down the equipment.
Firmware Code
System software 9900
System firmware 9930
Engine firmware 9901
Scanner firmware 9902
NIC firmware 9990
DF firmware 9903
PFC firmware 9940
Finisher firmware 9904
Hole Punch Unit firmware 9944
FAX board firmware (Line1) 9905
FAX board firmware (Line2) 9969
To Next Page
Loading...
