Toshiba E-STUDIO4508A - 9.2.8 Precautions and procedure when replacing the SRAM

9
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
REPLACEMENT OF PC BOARDS/HDD
9 - 25
9.2.8 Precautions and procedure when replacing the SRAM
Notes:
• Do not replace the HDD and the SRAM together.
• Be careful not to damage the board when replacing the SRAM.
• When the SRAM is replaced, do not perform HDD partition creation (Format HDD) before the
normal start-up.
A procedure for replacing the SRAM is shown below.
When disposing of the SRAM, perform the items in  P. 9-37 "9.3.4 Precautions when disposing of the
SRAM".